 |
|
|
|
|
Huldra Mark IV 5.56 Tactical Elite
Specs: | Caliber: | 5.56x45 | | Chamber: | 5.56 NATO | | Barrel Length: | 16" | | Barrel Twist: | 1:7 Right Hand - M4 Feed Ramps | | Barrel Profile: | Government Contour | | Barrel Material: | CrMoV 4150 | | Barrel Coating: | Melonite | | Barrel Lining: | Melonite | | Upper Receiver: | Dry Film Lubed - T Marked | | Gas System: | Mid Length | | Trigger: | 4.5lb JP Single Stage | | Stock: | Vltor IMod Mil-Spec | | Grip: | Ergo Ambi | | Fore Arm: | Free Float extended Quad Rail;
1913 Mil-Spec; 6061 T6 Aluminum | | Rail Length: | 12" EXP | | Rail Width: | 2.2" | | Rail Height: | 2.45" | | Flash Hider: | A2 Flash Hider | | Overall Length Retracted: | 32.25" | | Overall Length Extended: | 35.5" | | Overall Weight: | 7.2 lbs. | | 100 Meter Accuracy: | 1 MOA | Magazine and Soft Sided Tactical Case Included
The Huldra Mark IV Tactical Elite’s patented piston system technology will run cleaner, cooler, and longer than any other AR. The mid-length piston system will give you the benefits of a longer free float forearm (with anti-rotational tabs) and extends along the sides and bottom of the gas block, giving you a longer, more ergonomic grip, as well as a longer sight radius between the front and rear sights for quicker acquisition and less felt recoil. The piston system parts and the barrel have been treated with our salt nitride meloniting process, making them harder than hard chrome. The 4.5 pound JP Trigger (a $259.95 value) gives you a perfectly crisp, precise break and extremely short reset. The complete absence of take-up and over-travel provides the best combination of speed and precision on the market. The ambidextrous safety allows you to flip off the safety on either side of the weapon. The rugged Mil-Spec Vltor IMod Stock has an extremely comfortable superior cheek weld with a non-slip removable butt pad. Each side compartment of The Vltor IMod can hold two AA or three lithium CR123 3-volt batteries and accepts a push-button, quick detachable sling swivel. The Ergo Grip is solid and comfortable. Its superior texture reduces slippage, even while wearing gloves and is virtually impervious to oils and solvents.
Our melonited corrosive resistant CrMoV (Chrome-Moly-Vanadium) 4150 barrels provides excellent coating uniformity and no tolerance build up in the barrel to create deviation. Our melonited barrels have higher lubricity, last longer and are just plain tougher than chrome lining. The barrel chambers are speed polished, reducing resistance on the cartridge entering and exiting the chamber. The upper and lower receivers are machined from high quality mil-spec 7075-T6 aluminum forgings, with critical tooling dimensions held within ±.001" and Type III Hardcoat finished. The mil-spec buffer tube is precision machined from 7075-T6 aluminum as well. The magwell front features recessed chevrons for improved control. |
|
|
|
|
|
| |
|
